LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - A-240E/L, A-244L & A-245E >> Component Disassembly & Reassembly >> Rear Planetary Gear >> Disassembly

Rear Planetary Gear: Disassembly

  1. Check No. 2 one-way clutch operation. Hold outer race and rotate hub. Hub should rotate freely counterclockwise and lock clockwise. See Figure.
  2. Remove thrust washers from both sides of planetary gear. Separate No. 2 one-way clutch and planetary gear. Remove snap rings and side retainers from No. 2 one-way clutch. Note position of No. 2 one-way clutch and remove from outer race. See Figure.