LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - A-240E/L, A-244L & A-245E >> Component Disassembly & Reassembly >> Direct Clutch >> Disassembly

Direct Clutch: Disassembly

  1. Remove snap ring from direct clutch drum. Remove flange, discs and plates. Note number and location of components. See Figure. Using Clutch Spring Compressor (09351-32070) and press, compress spring retainer and springs. Remove snap ring, clutch spring compressor, spring retainer and piston return springs.
  2. Install direct clutch on oil pump. Apply compressed air to oil pump oval shaped oil passage to remove piston. See Figure. Remove direct clutch from oil pump. Remove clutch piston "O" rings.
scientia non olet · About LEMON Manuals