Shift Interlock System

Note component locations. See SHIFT INTERLOCK SYSTEM COMPONENT LOCATIONS table. Test shift interlock system. See Fig 1 and Fig 2 .
To determine proper connector identification on shift lock control module and ground connections, see CONNECTOR IDENTIFICATION & GROUND CONNECTION LOCATION table.

NOTE: Brakelight switch may be referred to as stoplamp switch or cruise stoplamp switch (models with cruise control).

SHIFT INTERLOCK SYSTEM COMPONENT LOCATIONS

Component

Location

Brakelight Switch ⁽¹⁾

Near Brake Pedal

Fuse Block

Near Driver's Side Kick Panel

Junction Block No. 1

Near Driver's Side Kick Panel

Shift Lock Control Module

Below Center Console, In Front Of Parking Brake

Shift Lock Control Switch

Below Shift Lever

Shift Lock Solenoid

Below Center Console, In Front Of Parking Brake

⁽¹⁾	Brakelight switch may be referred to as stoplamp switch or cruise stoplamp switch (models with cruise control).

CONNECTOR IDENTIFICATION & GROUND CONNECTION LOCATION

Component		Description
Shift Lock Control Module Connectors
C1		Blue Color With 2 Cavities
C2		Natural Color With 3 Cavities
C3		Black Color With 2 Cavities
Location
Ground Connections
G201		Near Right Side Of Radio

Fig 1: Testing Shift Interlock System (1 of 2)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Testing Shift Interlock System (2 of 2)

Courtesy of GENERAL MOTORS CORP.

Fig 3: Shift Interlock System Wiring Diagram

Courtesy of GENERAL MOTORS CORP.