LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Stabilizer Bar >> Removal & Installation (Prizm GSi)

Removal & Installation (Prizm GSi)

  1. Raise and support vehicle, allowing suspension to hang freely. Remove wheels. Disconnect left and right stabilizer links from stabilizer bar. See Figure .
  2. Disconnect catalytic converter from front exhaust pipe. Disconnect right and left stabilizer brackets from body. Remove stabilizer bar from vehicle. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals