LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Servicing - A/T) >> Adjustments >> Throttle Cable >> Paseo

Throttle Cable: Paseo

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1992 Toyota Tercel, 1992 Toyota Supra, 1992 Toyota Paseo, 1992 Toyota MR2, and 1992 Toyota Cressida. However, it is still accessible from the selected car via links, so may be relevant.
  1. Depress accelerator pedal and ensure throttle valve opens fully. Ensure throttle cable is installed correctly and does not bind.
  2. With throttle valve fully closed, adjust cable housing so distance between end of boot and stopper on cable is .04" (1 mm). See Figure. Tighten adjusting nut and recheck adjustment.