LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Servicing - A/T) >> Adjustments >> Shift Linkage >> Cressida & Supra

Cressida & Supra

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1992 Toyota Tercel, 1992 Toyota Supra, 1992 Toyota Paseo, 1992 Toyota MR2, and 1992 Toyota Cressida. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen swivel nut on shift linkage. Push manual shift lever fully toward rear of vehicle. See Fig 1. Return lever 2 notches to Neutral position. Ensure shift lever is in "N" position. While holding lever lightly toward "R" range side, tighten swivel nut to 61 INCH lbs. (6 N.m).
  2. Start engine and ensure vehicle moves forward and reverse when shifting shift lever from "N" to "D", then to "R" positions.
Fig 1: Adjusting Shift Linkage Position
G82879Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002