LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Servicing - A/T) >> Adjustments >> Neutral Safety Switch

Neutral Safety Switch

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1992 Toyota Tercel, 1992 Toyota Supra, 1992 Toyota Paseo, 1992 Toyota MR2, and 1992 Toyota Cressida. However, it is still accessible from the selected car via links, so may be relevant.

Loosen neutral safety switch bolts. Position shift lever in "N". Align switch shaft groove to neutral basic line. See Fig 1. Tighten adjusting bolt.

Fig 1: Adjusting FWD Neutral Safety Switch (RWD Is Similar)
G100116Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals