LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Servicing - A/T) >> Shift Cable Adjustments >> CAMRY, CELICA, Corolla, MR2 & Tercel

CAMRY, CELICA, Corolla, MR2 & Tercel

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1991 Toyota Tercel, 1991 Toyota Supra, 1991 Toyota MR2, 1991 Toyota Cressida, and 1991 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen swivel nut on manual shift lever. Push manual shift lever fully toward right side of vehicle.
  2. Return lever 2 notches to Neutral position. Ensure shift lever is in "N". While holding lever lightly toward "R" range side, tighten swivel nut to 61 INCH lbs. (6 N.m). See Fig 1.
Fig 1: Adjusting Shift Cable
G82878Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002