LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Servicing - A/T) >> Lubrication >> Draining & Refilling >> Prizm GSi

Prizm GSi

WARNING: This page is about a different car, the 1992 Geo Tracker and 1992 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove necessary lower covers. Remove drain plug from lower area of differential. Remove drain plug from oil pan (if equipped). Drain fluid. Remove oil pan protector, oil pan and gasket. Remove filter screen and gasket.
  2. Install new filter screen and gasket. Tighten filter screen bolts to 84 INCH lbs. (9 N.m). Install oil pan, gasket and oil pan protector. Tighten oil pan bolts to 44 INCH lbs. (5 N.m). Tighten drain plugs to 20 ft. lbs. (27 N.m).
  3. Fill transaxle with Dexron-II, and check fluid level. See CHECKING FLUID LEVEL .