LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Servicing - A/T) >> Lubrication >> Draining & Refilling >> Prizm (Transaxle)

Prizm (Transaxle)

WARNING: This page is about a different car, the 1992 Geo Tracker and 1992 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove drain plug and drain fluid. Install drain plug, and tighten it to 29 ft. lbs. (39 N.m). If replacing filter screen, remove oil pan bolts, oil pan and gasket. Remove filter screen bolts and filter screen, noting bolt length for reassembly reference.
  2. Install new filter screen. Ensure bolts are installed in original locations. See Figure. Tighten filter screen bolts to 89 INCH lbs. (10 N.m). Install gasket and oil pan. Tighten bolts to 44 INCH lbs. (5 N.m). Add 2.4 qts. (2.3L) of Dexron-II through dipstick tube. Check fluid level. See CHECKING FLUID LEVEL .
scientia non olet · About LEMON Manuals