Transaxle & Transmission
WARNING: This page is about a different car, the 1992 Geo Tracker and 1992 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
- Engine must be at normal operating temperature. Park vehicle on level surface, and apply parking brake. Place selector lever in PARK position.
- Start engine, and allow it to idle. Apply brakes, shift through all gears and return selector lever to PARK position.
- Remove dipstick. Fluid level should be in HOT or FULL HOT range. Add fluid (if necessary), and recheck level. DO NOT overfill.