Prizm & Prizm GSi (Cable Replacement)
WARNING: This page is about a different car, the 1992 Geo Tracker and 1992 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
- If installing new throttle valve cable, stake a new stopper in position. Bend cable so it has about a 7.870 (200.00 mm) radius. See Fig 1.
- Pull lightly on inner cable until a slight resistance is felt. Stake stopper .031-.059" (0.78-1.50 mm) from end of outer cable.