Storm & Storm GSi
WARNING: This page is about a different car, the 1992 Geo Tracker and 1992 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
- Remove air intake duct and air breather tube from air cleaner. Separate air cleaner halves. Loosen neutral safety switch retaining bolts.
- Ensure gearshift is in NEUTRAL position. Install adjusting pin in holes of neutral safety switch and switch lever. See Fig 1. Tighten neutral safety switch bolts to 26 INCH lbs. (3 N.m). To install components, reverse removal procedure. Tracker Information is not available from manufacturer.