LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Servicing - A/T) >> Adjustments >> Neutral Safety Switch >> Prizm GSi

Prizm GSi

WARNING: This page is about a different car, the 1992 Geo Tracker and 1992 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set parking brake. Place gearshift in NEUTRAL position. Raise and support vehicle. Remove lower covers for access to transaxle. Remove retaining nut and shift lever from transaxle. See Figure.
  2. Remove staked area from retaining nut on shaft for manual shift lever on transaxle. Loosen neutral safety switch mounting bolts. Rotate neutral safety switch so flat areas on manual shift valve are parallel to switch mark.
  3. Tighten mounting bolts to 44 INCH lbs. (5 N.m). Stake retaining nut for manual shift lever. Install shift lever and retaining nut. Tighten retaining nut to 22 ft. lbs. (30 N.m).
scientia non olet · About LEMON Manuals