Storm & Storm GSi

WARNING: This page is about a different car, the 1992 Geo Tracker and 1992 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.

Place ignition switch in LOCK position and gearshift in PARK position. Loosen front and rear lock nuts at shift lever on transaxle. See Fig 1.
Ensure gearshift is in PARK position. Pull gearshift cable forward. Hand-tighten front lock nut until it contacts shift lever. Hand-tighten rear lock nut until it contacts shift lever. Tighten both lock nuts.

Fig 1: Adjusting Gearshift Cable (Storm & Storm GSi)

Courtesy of GENERAL MOTORS CORP.