Inflator Module: Installation
WARNING: This page is about a different car, the 1991 Geo Storm, 1991 Geo Metro, 1990 Geo Storm, and 1990 Geo Metro. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Tighten inflator module screws to specification. See TORQUE SPECIFICATIONS .
- After all components are installed, reactivate SIR system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check AIR BAG indicator light to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .