LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - Tests W/Codes) >> Diagnostic Code Charts (GSI) >> Code 14, Ignition Signal Circuit, No Signal >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 1992 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.

Intermittent condition may be caused by rubbed-through insulation, or a wire broken inside the insulation. Check ECM harness connectors for backed-out or damaged terminals. If code is intermittent, refer to TESTS W/O CODES article in this section.

Fig 1: Code 14 Schematic (GSi), Ignition Signal Circuit No Signal
G92A26617
Fig 2: Code 14 Flow Chart (GSi), Ignition Signal Circuit No Signal
G92C26619