Switch Check
Disconnect oil pressure switch wire connector. See OIL PRESSURE SWITCH LOCATION table. Using ohmmeter, measure resistance between switch terminal and ground. Continuity should exist with engine stopped. No continuity should be present when there is oil pressure (engine running). Replace as required.
OIL PRESSURE SWITCH LOCATION
| Model | Location |
|---|---|
| Metro | Located on Front of Engine, Above Oil Filter |
| Prizm | Located on Left Front of Engine, Above Oil Filter |
| Storm SOHC | Located on Right Rear of Engine, Near Oil Filter |
| Tracker | Located at Right Front of Engine, |
| " | Below Exhaust Manifold |