Metro, Prizm, Prizm GSi & Tracker
- With engine off, pump brake pedal until all vacuum is exhausted from power brake unit. Push brake pedal with a force of approximately 66 lbs. (30 kg). Measure distance between brake pedal face and floor.
- Distance must not be less than 2.4" (60 mm) on Metro, 2.2" (56 mm) on Prizm and Prizm GSi, and 5.1" (130 mm) on Tracker. If measured distance is less than specified, check for air in hydraulic system, worn rear brake shoes, defective rear brake self-adjusters and improper brake pedal push rod adjustment.