Prizm, Prizm GSi, Storm & Storm GSi
- Brake pedal height is measured from face of brake pedal pad to asphalt sheet under carpet. See Figure. To adjust pedal height, loosen stoplight switch and lock nut on brake pedal push rod.
- Turn brake pedal push rod until specified pedal height is obtained. On Prizm and Prizm GSi, height should be 5.5-5.9" (139-149 mm). On Storm and Storm GSi, height should be 6.2" (157 mm).
- On all models, tighten lock nut on brake pedal push rod after adjusting pedal height. Adjust stoplight switch. See STOPLIGHT SWITCH under ADJUSTMENTS . Tighten stoplight switch lock nut.