LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Testing >> Hazard Flasher >> Prizm

Hazard Flasher: Prizm

  1. Ensure hazard fuse and turn signal flasher unit are okay. Disconnect battery negative cable. Disconnect 10-pin hazard switch connector under left side of instrument panel.
  2. With hazard switch off, check continuity between Green/White and Green/Red wires. If no continuity is present, replace hazard switch. If continuity is present, go to next step.
  3. Turn hazard switch on. Check continuity between White and Green/Red wires. If continuity is not present, replace hazard switch. If continuity is present, check continuity between Green/White and Green/Black wires, and Green/White and Green/Yellow wires. If continuity is not present, replace hazard switch.
scientia non olet · About LEMON Manuals