LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [5,6] >> Removal & Installation >> Rear Crankshaft Oil Seal >> Removal

Rear Crankshaft Oil Seal: Removal

  1. Remove oil pan. See OIL PAN under REMOVAL & INSTALLATION. Remove transaxle. Place reference mark on crankshaft and flywheel/ drive plate. Remove flywheel/drive plate.
  2. On Prizm, remove rear plate from cylinder block. On all models, remove seal retainer from cylinder block. Remove seal from seal retainer.
scientia non olet · About LEMON Manuals