LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [5,6] >> Removal & Installation >> Camshaft >> Inspection

Removal & Installation: Camshaft: Inspection

  1. Inspect components for damage. Measure camshaft journal diameter, lobe height, and journal runout. Replace camshaft if measurements are not within specification. See CAMSHAFT table under ENGINE SPECIFICATIONS at end of article.
  2. Install camshaft in cylinder head. Using Plastigage, check camshaft oil clearance. Replace camshaft and/or cylinder head if oil clearance is not within specification. See CAMSHAFT table.
  3. Check camshaft end play with camshaft bearing cap bolts tightened to specification. Replace camshaft and/or cylinder head if end play is not within specification. See CAMSHAFT table.
scientia non olet · About LEMON Manuals