LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [5,6] >> Lubrication >> Oil Cooler >> Removal & Installation (Prizm GSi)

Removal & Installation (Prizm GSi)

  1. Disconnect negative battery cable. Raise and support vehicle. Remove oil filter. Disconnect oil cooler lines. Remove retaining bolt and oil cooler.
  2. To install, reverse removal procedure. Tighten retaining bolt to specification. See TORQUE SPECIFICATIONS table.
scientia non olet · About LEMON Manuals