LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Metro XFi >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Intake Manifold (Fuel Injected) >> Removal (Fuel Injected)

Removal (Fuel Injected)

WARNING: This page is about a different car, the 1989 Suzuki Swift, 1989 Suzuki Sidekick, and 1989 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure as previously described. Disconnect negative battery cable. Drain cooling system. Remove air intake hoses and air breather hoses.
    CAUTION: Release fuel pressure before removing fuel line.
  2. Remove air cleaner assembly. Disconnect all electrical connections from intake manifold, injectors and throttle body. Disconnect vacuum hoses from intake manifold.
  3. Disconnect coolant hoses from manifold and remove upper radiator hose. Remove fuel supply and return lines from delivery pipe. Disconnect all control cables.
  4. Remove lower intake manifold-to-cylinder head bolts. Remove lower intake manifold and gasket. Remaining components can be removed from intake manifold if required.
scientia non olet · About LEMON Manuals