LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Metro XFi >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Engine (Swift) >> Installation

Engine (Swift): Installation

WARNING: This page is about a different car, the 1989 Suzuki Swift, 1989 Suzuki Sidekick, and 1989 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

Lower engine and transaxle/transmission into vehicle. Install rear mount nut. Raise vehicle and support engine. Remove front mount and bracket at frame. Align stud of motor mount with hole in engine bracket. Lower engine and install bolts into frame bracket. To complete installation, reverse removal procedure.