LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Metro XFi >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0]) >> Overhaul >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

WARNING: This page is about a different car, the 1989 Suzuki Swift, 1989 Suzuki Sidekick, and 1989 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head. See appropriate CYLINDER HEAD section. Remove oil dipstick guide, oil pan and screen. Ensure connecting rods and rod caps are marked for reassembly reference. Remove ridge from top of cylinder bores.
  2. Remove connecting rod caps. Install protective hose over connecting rod bolts. Remove connecting rod and piston assembly through top of cylinder block. Mark cylinder number on piston crown. Remove piston rings.
scientia non olet · About LEMON Manuals