Piston/Pin/Ring Specifications

WARNING: This page is about a different car, the 1989 Suzuki Swift, 1989 Suzuki Sidekick, and 1989 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

PISTONS, PINS & RINGS SPECIFICATIONS

Application

In. (mm)

Piston Clearance

.0008-.0015 (.020-.038)

Piston Diameter

1.3L ⁽¹⁾

2.9126-2.9130 (73.969-73.988)

1.6L ⁽²⁾

2.9520-2.9524 (74.971-74.991)

Pins

Diameter

n/a

Piston Fit

n/a

Rod Fit

Press

Rings

Ring No. 1

End Gap

.0079-.0137 (.200-.350)

Side Clearance

.0012-.0027 (.030-.070)

Ring No. 2

End Gap

.0079-.0137 (.200-.350)

Side Clearance

.0008-.0023 (.020-.060)

Oil Ring

End Gap

.0079-.0275 (.200-.700)

Side Clearance

n/a

⁽¹⁾	Cylinder block is stamped with cylinder bore diameter I.D. numbers. Specification is for I.D. No. 1. The I.D. for No. 2 is 2.9122-2.9126" (73.97-73.98mm).

⁽²⁾	Cylinder block is stamped with cylinder bore diameter I.D. numbers. Specification is for I.D. No. 1. The I.D. for No. 2 is 2.9516-2.9520" (74.97-74.98mm).