LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Metro XFi >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.0L 3-CYL - VIN [6] >> Removal & Installation >> Intake Manifold >> Removal

Intake Manifold: Removal

  1. Release fuel pressure. See FUEL PRESSURE RELEASE in this article. Disconnect negative battery cable. Drain cooling system. Remove air cleaner assembly.
  2. Disconnect necessary electrical connections, coolant hoses, fuel lines and vacuum hoses from throttle body and intake manifold. Disconnect control cables from throttle body. Remove intake manifold bolts, intake manifold and gasket.
scientia non olet · About LEMON Manuals