LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Tracker Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Brake Shoes (Metro) >> Installation

Rear Brake Shoes (Metro): Installation

  1. Install parking brake shoe lever. Install self-adjusting strut. Install parking brake cable in lever. Install hold-down springs. Install brake shoes and return springs.
  2. Install brake drum, washer and new drive axle nut. Tighten drive axle nut to 74 ft. lbs. (100 N.m). Stake drive axle nut in place. Install spindle cap. Adjust rear brakes. See REAR DRUM BRAKE SHOES  under ADJUSTMENTS in this article.
scientia non olet · About LEMON Manuals