LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Tracker Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Rotor & Hub >> Removal (Metro)

Removal (Metro)

  1. Remove caliper. Using wire, support caliper from frame. Straighten staked part of drive axle nut. Remove and discard drive axle nut. Remove washer from end of drive axle. Measure distance between outside rotor face and outside edge of caliper support bracket. See Fig 1.
  2. Record dimension "A" for installation reference. Using slide hammer and adapter, remove axle hub and rotor as an assembly. Remove hub-to-rotor bolts from hub and separate hub from rotor.
Fig 1: Measuring Rotor Position (Metro)
G100287Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals