LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Tracker Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Rear Drum Brake Shoes >> Metro

Rear Drum Brake Shoes: Metro

  1. Drum-to-shoe clearance adjustment is only required when brake shoes are replaced or brake drum is removed for service.
  2. Adjustment is automatically accomplished by depressing brake pedal 3-5 times with approximately 66 lbs. (30 Kg) load after all parts are installed. After adjusting brake shoes, check brake drum for dragging and brake system for proper operation.
scientia non olet · About LEMON Manuals