LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Camshaft >> Removal (SOHC)

Removal (SOHC)

WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head. See CYLINDER HEAD  . Remove rocker arms and shafts. See ROCKER ARM & VALVE LASH ADJUSTER  under REMOVAL & INSTALLATION.
  2. Use .35" (9 mm) rod to lock camshaft. See Fig 1 . Remove camshaft sprocket. Remove camshaft from rear of head. Remove oil seal.
Fig 1: Locking Camshaft for Timing Belt Sprocket Removal (SOHC)
G91C00168Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals