Crankshaft, Main & Connecting Rod Bearings Specifications
WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS SPECIFICATIONS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| 1.3L | ||||||
| Crankshaft | ||||||
| End Play | .004-.012 (.11-.31) | |||||
| Runout | .002 (.06) | |||||
| Main Bearings | ||||||
| Journal Diameter (1) | ||||||
| Marked 1 | 1.7714-1.7716 (44.994-45.000) | |||||
| Marked 2 | 1.7712-1.7714 (44.988-44.994) | |||||
| Marked 3 | 1.7710-1.7712 (44.982-44.988) | |||||
| Journal Out-Of-Round | .0004 (.010) | |||||
| Journal Taper | .0004 (.010) | |||||
| Oil Clearance | .0012 (.030) | |||||
| Connecting Rod Bearings | ||||||
| Journal Diameter | 1.6529-1.6535 (41.982-42.000) | |||||
| Journal Out-Of-Round | .0004 (.010) | |||||
| Journal Taper | .0004 (.010) | |||||
| Oil Clearance | .001-.003 (.03-.08) | |||||
| 1.6L | ||||||
| Crankshaft | ||||||
| End Play | .004-.012 (.11-.31) | |||||
| Runout | .002 (.06) | |||||
| Main Bearings | ||||||
| Journal Diameter (1) | ||||||
| Marked 1 | 2.0470-2.0472 (51.994-52.000) | |||||
| Marked 2 | 2.0468-2.0470 (51.988-51.994) | |||||
| Marked 3 | 2.0465-2.0468 (51.982-51.988) | |||||
| Journal Out-Of-Round | .0004 (.010) | |||||
| Journal Taper | .0004 (.010) | |||||
| Oil Clearance | .0012 (.030) | |||||
| Connecting Rod Bearings | ||||||
| Journal Diameter | 1.7316-1.7323 (43.982-44.000) | |||||
| Journal Out-Of-Round | .0004 (.010) | |||||
| Journal Taper | .0004 (.010) | |||||
| Oil Clearance | .001-.003 (.03-.08) | |||||
|
||||||