LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 2D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Wheel Hub & Disc Brake Rotor >> Removal

Wheel Hub & Disc Brake Rotor: Removal

  1. Raise and support vehicle on safety stands, allowing suspension to hang freely. Remove wheel. Measure hub installation depth "A" for reassembly reference. See Figure . Straighten staked part of drive axle nut. Remove and discard drive axle nut. Depress brake pedal. Loosen, but do not remove disc brake rotor bolts.
  2. Remove caliper bolts. Remove caliper and hang out of way. Remove hub and disc brake rotor with slide hammer and Adapter (J-2619-01 ). Separate wheel hub and disc brake rotor. Remove spacer from wheel hub.
scientia non olet · About LEMON Manuals