LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 2D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.0L 3-CYL - VIN [6] >> Overhaul >> Rod Bearings Service

Rod Bearings Service

  1. Note direction of connecting rod and cap installation before removal. Connecting rod must be installed with oil hole toward intake manifold side of engine. See Figure. Arrow mark on connecting rod cap must point toward timing belt end of engine.
  2. Ensure bearing oil clearance and side play are within specification. See CRANKSHAFT MAIN & ROD BEARINGS SPECS TABLE at end of article.
scientia non olet · About LEMON Manuals