LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 2D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Rear Drum Brake Shoes >> Prism, Prism GSi, Storm, Storm GSi & Tracker

Prism, Prism GSi, Storm, Storm GSi & Tracker

  1. Raise and support vehicle. Remove wheel and brake drum. Install drum-to-shoe Clearance Gauge (J-22364-01) so clearance gauge measures inside diameter of brake drum. Remove clearance gauge and reverse it to measure brake shoe linings.
  2. Position clearance gauge over brake shoe lining. Turn self-adjuster until primary and secondary brake shoes contact clearance gauge. Reinstall brake drum and wheel. Lower vehicle. Check brake fluid. Road test for proper brake system operation.
scientia non olet · About LEMON Manuals