LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 2D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Removal & Installation >> Steering Wheel & Horn Pad >> Removal

Steering Wheel & Horn Pad: Removal

  1. Ensure front wheels are straight. Disconnect negative battery cable. Pull horn switch/center pad assembly from steering wheel. Use cloth-covered, flat-blade screwdriver to pry horn switch/center pad assembly from contact plate (if necessary).
  2. Remove contact plate screws. Disconnect wires and remove contact plate. Remove steering wheel retaining nut. Mark steering wheel and shaft for reassembly reference. Using steering wheel puller, remove steering wheel. See Figure and Figure .
scientia non olet · About LEMON Manuals