LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Rocker Arm & Valve Lash Adjuster >> Installation (1.3L SOHC & 1.6L)

Installation (1.3L SOHC & 1.6L)

WARNING: This page is about a different car, the 1992 Suzuki Swift, 1992 Suzuki Sidekick, and 1992 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Intake rocker shaft has a .55" (14 mm) stepped end. Exhaust rocker shaft has a .59" (15 mm) stepped end. Ensure intake rocker shaft stepped end faces front of engine and exhaust rocker shaft stepped end faces rear of engine. Adjust valve clearance. See VALVE CLEARANCE ADJUSTMENT  under ADJUSTMENTS.

scientia non olet · About LEMON Manuals