Fuel Pressure Release

WARNING: This page is about a different car, the 1992 Suzuki Swift, 1992 Suzuki Sidekick, and 1992 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

Place transmission in Neutral (M/T) or Park (A/T). Set parking brake and block drive wheels.
On Samurai, disconnect fuel pump relay connector. Fuel pump relay is located on right kick panel, above ECM. See Fig 1 .
On Sidekick, disconnect control relay connector "A" (relay with Pink wire). Control relay is located on the left kick panel. See Fig 2 .
On Swift, remove engine coolant reservoir from bracket. Remove main fuse box cover, located near battery. Remove main fuse box from body to access fuel pump relay connector. Disconnect fuel pump relay connector. See Fig 3 .
On all models, remove fuel filler cap to release fuel vapor pressure. Reinstall fuel filler cap. Start engine, and idle until engine dies. Crank engine 2 or 3 times to ensure lines are empty. Reconnect fuel pump relay connector.

Fig 1: Locating Fuel Pump Relay (Samurai)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Locating Fuel Pump Relay (Sidekick)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 3: Locating Fuel Pump Relay (Swift)

Courtesy of SUZUKI OF AMERICA CORP.