LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

WARNING: This page is about a different car, the 1992 Suzuki Swift, 1992 Suzuki Sidekick, and 1992 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove water pump, crankshaft pulley and alternator. Remove timing belt cover and timing belt. See TIMING BELT  under REMOVAL & INSTALLATION.
  2. Drain engine oil. Remove oil dipstick and oil pan. Remove oil pump pick-up screen. Remove oil pump assembly. Remove oil pump rotor plate.
  3. Mark outer gear using felt pen for reassembly reference. Remove inner and outer oil pump gears. Remove plug, relief spring and relief valve. Drive out oil seal.
scientia non olet · About LEMON Manuals