Installation (All Models)
WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Intake rocker shaft has a .55" (14 mm) stepped end. Exhaust rocker shaft has a .59" (15 mm) stepped end. Ensure intake rocker shaft stepped end faces front of engine and exhaust rocker shaft stepped end faces rear of engine. Adjust valve clearance. See VALVE CLEARANCE ADJUSTMENT .