LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Overhaul >> Cylinder Block

Cylinder Block

WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect block for distortion of deck surface. Warpage limit is .002" (.05 mm). Inspect block for cracks, scratches and other defects. Measure bores at 3 levels for wear, taper and out-of-round condition.
  2. If bore wear, taper or out-of-round exceed specification, rebore cylinders. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals