Valves & Valve Springs Specifications
WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
VALVES & VALVE SPRINGS SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| 1.3L | ||||
| Intake Valves | ||||
| Face Angle | 45° | |||
| Minimum Margin | .023" (.6 mm) | |||
| Stem Diameter | ||||
| DOHC | .2152-.2157" (5.465-5.480 mm) | |||
| SOHC | .2742-.2748" (6.965-6.980 mm) | |||
| Valve Tip Maximum Refinish | .019" (.5 mm) | |||
| Exhaust Valves | ||||
| Face Angle | 45° | |||
| Minimum Margin | .027" (.7 mm) | |||
| Stem Diameter | ||||
| DOHC | .2146-.2151" (5.450-5.465 mm) | |||
| SOHC | .2737-.2742" (6.950-6.964 mm) | |||
| Valve Tip Maximum Refinish | .019" (.5 mm) | |||
| Valve Springs | ||||
| Free Length | ||||
| DOHC | 2.008" (51.00 mm) | |||
| SOHC | 1.941" (49.30 mm) | |||
| Out-Of-Square | .079" (2.00 mm) | |||
| Pressure: | Lbs. @ In. (Kg @ mm) | |||
| DOHC | 61-74 @ 1.67 (27.5-33.5 @ 42.5 mm) | |||
| SOHC | 55-64 @ 1.63 (24.8-29.2 @ 41.4 mm) | |||
| 1.6L | ||||
| Intake Valves | ||||
| Face Angle | 45° | |||
| Minimum Margin | .023" (.6 mm) | |||
| Stem Diameter | .2742-.2748" (6.965-6.980 mm) | |||
| Valve Tip Maximum Refinish | .019" (.5 mm) | |||
| Exhaust Valves | ||||
| Face Angle | 45° | |||
| Minimum Margin | .027" (.7 mm) | |||
| Stem Diameter | .2737-.2742" (6.950-6.965 mm) | |||
| Valve Tip Maximum Refinish | .019" (.5 mm) | |||
| Valve Springs | ||||
| Free Length | 1.987" (50.46 mm) | |||
| Out-Of-Square | .079" (2.00 mm) | |||
| Pressure: | Lbs. @ In. (Kg @ mm) | |||
| Valve Closed | 55-64 @ 1.63 (24.8-29.2 @ 41.5) | |||