LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Metro LSi, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Engine Lubrication >> Oil Pump >> Removal & Disassembly

Removal & Disassembly

WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position No. 1 piston at TDC of compression stroke. Remove water pump, crankshaft pulley and alternator. Remove timing belt cover and timing belt. See TIMING BELT  under REMOVAL & INSTALLATION.
  2. Drain engine oil. Remove oil dipstick and oil pan. Remove oil pump pick-up screen. Remove oil pump assembly. Remove oil pump rotor plate.
  3. Mark outer gear with felt pen for reassembly reference. Remove inner and outer oil pump gears. Remove plug, relief spring and relief valve.
scientia non olet · About LEMON Manuals