Stoplight Switch Adjustment
Pull up on brake pedal and hold. Measure distance between face of brake pedal contact plate and end of stoplight switch threads. Adjust if distance is not within specification. See STOPLIGHT SWITCH ADJUSTMENT table. Tighten switch to 8-11 ft. lbs. (10-15 N.m).
STOPLIGHT SWITCH ADJUSTMENT
| Application | In. (mm) |
|---|---|
| Metro & Tracker | .02-.04 (.5-1.0) |
| Spectrum | .004-.020 (.1-.5) |
NOTE:
Location or numbers of anti-rattle springs, anti-squeal shims, pad support and guide plates will vary between models. Note component locations during removal process for reassembly reference.