LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1989 >> Metro Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (1.0L 3-CYL - VIN [5] & 1.0L 3-CYL Turbo - VIN [2]) >> Removal & Installation >> Exhaust Manifold >> Installation

Exhaust Manifold: Installation

WARNING: This page is about a different car, the 1987 Chevrolet Sprint. However, it is still accessible from the selected car via links, so may be relevant.

Install manifold using new gasket. Tighten manifold nuts and bolts to 14-20 ft. lbs. (18-27 N.m). To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals