LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2024 >> GV80 3.5T >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake And Exhaust System - 3.5L >> Air Cleaner >> Repair Procedures >> Removal and Installation >> RH air cleaner assembly

RH air cleaner assembly

  1. Disconnect the battery negative terminal from the trunk room.
  2. Remove the engine cover.

    (Refer to Engine and Transmission Assembly - "ENGINE COVER ")

  3. Remove the engine room cover.

    (Refer to Engine and Transmission Assembly - "ENGINE COVER ")

  4. Remove the RH air duct (A).

    Tightening torque:  7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.7 - 7.2 lb.ft)

    G16776450Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the RH air intake hose (A).
    G16776451Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the RCV hose (A).
    G16776452Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the RH air cleaner assembly (A).
    G16776453Courtesy of HYUNDAI MOTOR AMERICA
  8. Install in the reverse order of removal.