Selection of Engine Oil
WARNING: This page is about a different variant/trim than selected.
Specification: SAE 0W-30, API SN PLUS/SP or ILSAC GF-6
Allowed oil SAE viscosity: Refer to recommended SAE viscosity number
NOTE:
For best performance and maximum protection of all types of operation, select only those lubricants which:
- Satisfy the requirement of the API or ILSAC classification.
- Must have proper SAE grade number for expected ambient temperature range.
- Lubricants that do not have both an SAE grade number and API or ILSAC service classification on the container should not be used.