Brake System - General Information: Specifications: Notes
TIGHTENING TORQUE SPECIFICATIONS
| Item | Specification | |
|---|---|---|
| Front brake Mando 18 inch (Disc) | Type | Ventilated disc |
| Disc O.D | 345 mm (13.58 in) | |
| Disc thickness | 30 mm (1.18 in) | |
| Cylinder type | Single piston | |
| Cylinder I.D. | Ø 63.5 mm (2.50 in) | |
| Front disc brake continental 19 inch (Disc) | Type | Ventilated disc |
| Disc O.D | 360 mm (14.17 in) | |
| Disc thickness | 34 mm (1.34 in) | |
| Cylinder type | 4 Piston | |
| Cylinder I.D. | Ø 44.0 mm (1.73 in) x 4 | |
| Rear brake 17 inch (Disc) | Type | Solid dusc |
| Disc O.D | 325 mm (12.7953 in) | |
| Disc thickness | 12 mm (0.47 in) | |
| Cylinder type | Single piston | |
| Cylinder I.D. | Ø 45 mm (1.77 in) | |
| Rear brake 18 inch (Disc) | Type | Ventilated disc |
| Disc O.D | 345 mm (13.58 in) | |
| Disc thickness | 20 mm (0.79 in) | |
| Cylinder type | Single piston | |
| Cylinder I.D. | Ø 45 mm (1.77 in) | |
| Parking brake | Type | Electric Parking Brake (EPB) |
| Integrated Electronic Booster (IEB) | Type | BLAC (Brushless AC Motor) |
| Operating Voltage | 9 ~ 17 V | |
| (Limited operation: 6.5 - 9 V, 17 ~ 18 V) | ||
| Stroke | Main Cylinder: 37 mm (1.46 in) | |
| Backup Cylinder: 34 mm (1.34 in) | ||
| Operating Temperature | -40°C ~ 120°C | |
| Max torque/Speed/Current | 2.93 N.m/1700 rpm/100 A | |
| Max output | 522 W | |
| Active Wheel speed sensor | Supply voltage | DC 4.25 ~ 20 V |
| Output current (Low) | 7 ± 1.05 mA | |
| Output current (High) | 14± 2.1 mA | |
| Output range | 0.03 ~ 3000 Hz | |
| Tone wheel | Front: 52 teeth, Rear: 52 teeth | |
| Air gap | 0.4 ~ 1.5 mm (0.02 - 0.06 in) | |
| Steering Wheel Angle Sensor | Operating Voltage | 8 - 16 V |
| Current Consumption | Max. 150 mA | |
| Output measurement range | -780 ~ + 779.9° | |
| Operating Angular velocity | 0 ~ 1016°/sec | |